Category: BleuIO firmware updates

Smart Sensor Devices is announcing a firmware update v2.0.2 for BleuIO and Smart USB dongle 2.0. We invite all the users to apply the updated firmware. The new firmware will be available to download on 7th April 2021, at https://www.bleuio.com/getting_started/docs/firmware/

Added features:

• Added new AT command ATA that hides (ATA0) or shows (ATA1) ASCII values from Notification, Indication, or GATT Read responses. ASCII values are shown by default.

Bug fixes

• Fixed a bug where running a scan and stopping it repeatedly would, in rare cases, cause a hard restart of the dongle.

To meet the demands of users, the BleuIO team will continue to update and add new features. To find out more about the updates of the dongles new firmware 2.0.2, please visit our Getting Started Guide. 

Smart Sensor Devices is announcing a firmware update v2.0.0 for Bleuio and Smart USB dongle 2.0. We invite all the users to apply the updated firmware. The new firmware will be available to download on 26th March 2021, at https://www.bleuio.com/getting_started/docs/firmware/

Improvments:

• You can now connect with up to 8 devices at the same time. And with the new dual mode role, you can scan, advertise, and connect to other devices without changing roles or disconnect. 
• In dual mode you can switch between acting as a server or client depending on your needs, while in Peripheral mode, you will always be acting as a server and in Central mode as a client.
• When connected to multiple devices, keep an eye on the conn_idx (connection index) when receiving or sending data to know which device you are sending to/receiving data from.

Added features:

• Increased possible connections to max 8. (Previously max 1).
• Added a new dual role with the capabilities of both Peripheral and Central.
• Added 5 new AT commands; 
  • AT+DUAL for dual role, 
  • AT+CLIENT and AT+SERVER for switching behaviour in Dual role towards targeted connection, 
  • AT+GETCONN for getting a list of active connections,
  • AT+TARGETCONN for choosing which connection you want to interact with.
• Added number of connections and maximum connections when connected in the ATI command info.
• Added a line with (conn_idx=conn_idx) above the [Received]: line when using the SPS service as a server with multiple connections to be able to tell which device sent the data.
• Added a line with (conn_idx=conn_idx) above the DISCONNECTED. line when connected to more than one other device to be able to tell which device disconnected.

To meet the demands of users, the BleuIO will continue to update and add new features.

Smart Sensor Devices is announcing a firmware update for Bleuio and Smart USB dongle 2.0. We invite all the users to apply the updated firmware. The new firmware will be available to download on 5th February 2021, at https://www.bleuio.com/getting_started/docs/firmware/

Firmware Update Improvements 

• It is now possible to access protected characteristics that need an increased security level. 
• Security level can be increased by successfully pairing/bonding.
• Security level will now be displayed when changed.

Newly Added features 

• Added AT Command AT+GAPIOCAP for setting or querying dongle input and output capabilities. Important for what type of security responses is available.
• Added AT Command AT+GAPPAIR for manually starting a pairing or bonding procedure.
• Added AT Command AT+GAPUNPAIR for unpairing all or selected devices.
• Added AT Command AT+ENTERPASSKEY for handling passkey requests when pairing/bonding.
• You are now able to secure the connection between other devices and the dongle or between dongles via pairing/bonding.
• The dongle is now capable of initialising or handling pairing and/or bonding requests. Depending on what Input/Output capability you’ve set on it.
• The dongle can now handle numeric comparison authentication or passkey authentication (with the new AT+ENTERPASSKEY command).

To meet the demands of users, the BleuIO will continue to update and add new features.